PAC Database - Detailed Chemical Data

Chemical Identity
Chemical CAS# UN# Health Code Numbers
Fluoroacetic acid, sodium salt; (Sodium fluoroacetate) 62-74-8 2629
15.01
4.01
4.08
4.05
7.01
8.00
7.00
4.09
4.06
4.10
Formula Synonyms
C2.H2.F.O2.Na SODIUM FLUOROACETATE, 1080, ACETIC ACID, FLUORO-, SODIUM SALT, COMPD 1080, COMPOUND 1080, COMPOUND NO. 1080, COMPOUND NO. 1080, FLUORACÉTATE DE SODIUM (DOT FRENCH), FLUOROACETATO DE SODIO (DOT SPANISH), FLUOROACETIC ACID SODIUM SALT, FLUOROACETIC ACID, SODIUM SALT, FRATOL, FURATOL, RATBANE 1080, SFA, SMFA, SODIUM FLUOACETATE, SODIUM FLUOACETATE ACID, SODIUM FLUOACETIC ACID, SODIUM FLUORACETATE, SODIUM MONOFLUOROACETATE, TEN-EIGHTY, TENATE, TL 869, YASOKNOCK
Physical Properties
Mol Wt State MP (°C) BP (°C) VP (Hg) VP (°C) SG LEL (ppm)
100.03 S 200
PAC Values
PAC Values (Original Units: mg/m3)
PAC-1 PAC-2 PAC-3
0.15 0.5 5
Converted PAC Values (ppm)
PAC-1 PAC-2 PAC-3
0.037 0.12 1.2
Technical Basis
A review of available sources identified exposure limits (Level of Concern (LOC), IDLH (1990), TLV-TWA) and several toxicity data of varying species and routes. Data sources were selected according to the hierarchy listed in Table 3.1. The IDLH (1990) was selected as the TEEL-3 basis. The LOC was selected as the TEEL-2. The TLV-TWA was selected as the TEEL-1 basis.
• TEEL-1 = TLV-TWA x 3 (0.05 mg/m3)
• TEEL-2 = LOC (0.0005 g/m3)
• TEEL-3 = IDLH (1990, 5 mg/m3)
This review generated TEEL values that are consistent with Rev. 29A*.
References
Chemical information: https://pubchem.ncbi.nlm.nih.gov/compound/Sodium-fluoroacetate
LOC: Retrieved from Exhibit C-1 (page C-8); https://www.epa.gov/sites/default/files/2015-09/documents/technical_guidance_for_hazard_analysis.pdf
TLV-TWA: https://www.acgih.org/sodium-fluoroacetate/
IDLH (1990): https://www.cdc.gov/niosh/idlh/62748.html
Search Again
PAC values marked with a subscript "A" correspond to 60-minute AEGL values.
PAC values marked with a subscript "E" correspond to ERPG values.
PAC values marked by * are >= 10% lower explosive limit (LEL) but < 50% LEL.
PAC values marked by ** are > 50% LEL but < 100% LEL.
PAC values marked by *** are >= LEL.