PAC Database - Detailed Chemical Data

Chemical Identity
Chemical CAS# UN# Health Code Numbers
Phenol 108-95-2 1671
13.00
6.00
14.01
4.01
11.01
14.02
4.08
4.05
7.01
8.00
Formula Synonyms
C6H6O PHENOL, SOLID, BENZENOL, CARBOLIC ACID, FENOL, SÓLIDO (DOT SPANISH), HYDROXYBENZENE, IZAL, MONOHYDROXYBENZENE, MONOPHENOL, NCI-C50124, OXYBENZENE, PHENIC ACID, PHENOL, PHÉNOL, SOLIDE (DOT FRENCH), PHENYL ALCOHOL, PHENYL HYDRATE, PHENYL HYDROXIDE, PHENYLIC ACID, PHENYLIC ALCOHOL, PHENOL, LIQUID, BAKER^S P AND S LIQUID AND OINTMENT, CARBOLIC OIL (MIXTURE), ENT 1814, PHENOL, MOLTEN
Physical Properties
Mol Wt State MP (°C) BP (°C) VP (Hg) VP (°C) SG LEL (ppm)
94.11 S 40.89 181.87 0.75 34.1 1.0545 @ 45°C 18000
PAC Values
PAC Values (Original Units: ppm)
PAC-1 PAC-2 PAC-3
15 23 200
Converted PAC Values (mg/m3)
PAC-1 PAC-2 PAC-3
58 89 770
Technical Basis
A review of available sources identified AEGLs (AEGL-1, AEGL-2) and ERPGs for this chemical. The AEGL-1 and AEGL-2 were selected as the TEEL-1 and TEEL-2, respectively, due to their priority among the emergency exposure limits (Section 1). AEGL values in units mg/m3 are reported as published in the technical support Table 4-9, per guidance (Section 3.4.7.2). Due to insufficient data, an AEGL-3 is not recommended; therefore, the ERPG-3 was selected as the TEEL-3 due to its priority among emergency exposure limits (Section 1).
• TEEL-1 = AEGL-1
• TEEL-2 = AEGL-2
• TEEL-3 = ERPG-3
This review generated TEEL ppm values consistent with Rev. 29A. Differences in the reported TEE-2 value in units mg/m3 may be due to conversion and rounding of these values, instead of use of source values.
References
AEGLs (Table 4-9) and chemical information (Table 4-2) retrieved from: https://www.epa.gov/aegl/phenol-results-aegl-program
ERPG-3 retrieved from: https://www.osha.gov/chemicaldata/94
Search Again
PAC values marked with a subscript "A" correspond to 60-minute AEGL values.
PAC values marked with a subscript "E" correspond to ERPG values.
PAC values marked by * are >= 10% lower explosive limit (LEL) but < 50% LEL.
PAC values marked by ** are > 50% LEL but < 100% LEL.
PAC values marked by *** are >= LEL.