PAC Database - Detailed Chemical Data

Chemical Identity
Chemical CAS# UN# Health Code Numbers
Trimethylaniline, 2,4,6- 88-05-1
13.00
14.01
15.02
8.00
4.10
4.07
7.10
3.02
3.10
3.06
Formula Synonyms
C9H13N ANILINE, 2,4,6-TRIMETHYL-, 1-AMINO-2,4,6-TRIMETHYLBENZENE, 2,4,6-TRIMETHYLANILINE, 2,4,6-TRIMETHYLPHENYLAMINE, 2-AMINOMESITYLENE, AMINOMESITYLENE, BENZENAMINE, 2,4,6-TRIMETHYL-, MESIDIN, MESIDINE, MESITYLAMINE, MESITYLENE, 2-AMINO-
Physical Properties
Mol Wt State MP (°C) BP (°C) VP (Hg) VP (°C) SG LEL (ppm)
135.23 L -5 232 0.96
PAC Values
PAC Values (Original Units: mg/m3)
PAC-1 PAC-2 PAC-3
0.26 2.9 10
Converted PAC Values (ppm)
PAC-1 PAC-2 PAC-3
0.047 0.52 1.8
Technical Basis
A review of available sources identified rat and mouse acute toxicity data (LD50, LC50) for inhalation and oral exposures, and a Level of Concern (LOC). Data sources were selected according to the hierarchy listed in Table 3.1. Toxicity data were selected according to type of exposure, species, and route according to the hierarchies stated in Sections 3.3.1, 3.3.2, and evaluated using factors in Tables 3.2, 3.3, and 3.4. The most preferred exposure type, a mouse LC50, was selected as the TEEL-3 basis and was scaled to a 60-minute equivalent using the ten Berge equation (Section 3.3.4). The LOC was selected as the TEEL-2. The TEEL-1 value was derived according to Table 3.5.
• TEEL-1 = TEEL-2/11
• TEEL-2 = LOC (0.0029 g/m3)
• TEEL-3 = Mouse LC50 (290 mg/m3/2H)
This review generated TEEL values that are consistent with Rev. 29A*.
References
Chemical information: https://pubchem.ncbi.nlm.nih.gov/compound/2_4_6-Trimethylaniline.
Mouse LC50: Toxicometric Parameters of Industrial Toxic Chemicals Under Single Exposure, Izmerov, N.F., et al., Moscow, Centre of International Projects, GKNT, 1982, -(20), 1982. Retrieved from: https://pubchem.ncbi.nlm.nih.gov/compound/2_4_6-Trimethylaniline.
LOC: Retrieved from Appendix C (page C-2) as “Aniline, 2,4,6-Trimethyl”; https://www.epa.gov/sites/default/files/2015-09/documents/technical_guidance_for_hazard_analysis.pdf
Search Again
PAC values marked with a subscript "A" correspond to 60-minute AEGL values.
PAC values marked with a subscript "E" correspond to ERPG values.
PAC values marked by * are >= 10% lower explosive limit (LEL) but < 50% LEL.
PAC values marked by ** are > 50% LEL but < 100% LEL.
PAC values marked by *** are >= LEL.